Configure Control

Configure Control Screen – This screen sets the function codes for each of the controls on the main screen. Touch a number, it will turn green and then use the keypad to enter the function code. To change the locomotive address, tap the large number at the top, it will turn green and you can use the keys to enter a new number. Or, if you are in Bluetooth Dead Rail Mode, it will allow you to change locomotives by pairing with a new device. These settings will be saved and re-loaded based on the Bluetooth pair name.

The two buttons ‘Config’ and ‘System’ are used to program the receiver. Click the ‘Next’ button below to show the screen displayed when you tap the ‘Config’ Button.